Evaporative Emission Control Canister: Service and Repair

REMOVAL and INSTALLATION
1. Raise vehicle on hoist.
2. Remove Evaporative Emissions (EVAP) canister bracket-to-body retaining bolt and lower EVAP canister and EVAP canister bracket.
3. Disconnect EVAP return tube from EVAP canister.
4. Remove EVAP canister bracket-to-EVAP canister push pin and separate EVAP canister from EVAP canister bracket, if required.
5. To install, reverse removal procedure. Tighten EVAP canister bracket-to-body retaining bolt to 5.2-7.2 Nm (43-63 lb in).