Vehicle Damage Warnings

ELECTRONIC CONTROL MODULES

CAUTION: Electronic modules are sensitive to static electrical charges. If the modules are exposed to these charges, damage may result. Refer to Module Service Precautions.

THROTTLE POSITION SENSORS

CAUTION: Slide the rotary tangs of the TP sensor, rotated one quarter turn clockwise away from their final installed position, into place over the throttle shaft blade, and then rotate the TP sensor counterclockwise only to the installed position. Failure to install the TP sensor in this manner may result in excessive idle speeds.

IDLE AIR CONTROL VALVE

CAUTION: If scraping is necessary, be sure not to damage the IAC valve or the throttle body gasket surfaces or drop the gasket material into the throttle body.

CAUTION: The IAC valve has a sludge resistant design and must not be cleaned, or damage to the anti-sludge coating may result.