Air Cleaner Fresh Air Duct/Hose: Service and Repair

REMOVAL and INSTALLATION
1. Remove Air Cleaner (ACL) intake resonators.
2. Remove engine ACL.
3. Remove power distribution box retaining screw and position power distribution box to access engine ACL inlet duct and tube retainer bolts.
4. Remove engine ACL inlet duct and tube retainer bolts and engine ACL intake tube and duct from LH front fender apron.
5. To install, reverse removal procedure. Tighten engine ACL inlet duct and tube retainer bolts to 5-6 Nm (45-53 inch lbs). Tighten power distribution box retaining screw securely.