Windshield Washer Switch: Description and Operation

MULTI-FUNCTION SWITCH
The multi-function switch, which is mounted to the steering column lock cylinder housing, provides electrical switching for the following:
- turn signal.
- hazard warning.
- cornering lamps.
- headlamp dimmer.
- headlamp flash-to-pass.
- windshield washer/wiper The intermittent wiper control switch, located in the knob at the end of the turn signal lever.

OPERATION
The windshield washer switch, located at the end of the turn signal lever, operates as follows:
- The ignition switch lock cylinder must be in RUN position to operate washer.
- Push the end of the turn signal lever in toward the center of the steering actuator housing to actuate the washer.
- Release the turn signal lever to turn off the washer.
- The windshield wipers will continue to operate briefly and then automatically return to the previous wiper speed setting (OFF, LO, HI or INT).
- Washer operation is available in all positions of wiper operation.