Turn Signal Switch: Description and Operation

MULTI-FUNCTION SWITCH
The multi-function switch, which is mounted to the steering column lock cylinder housing, provides electrical switching for the following:
- turn signal.
- hazard warning.
- cornering lamps.
- headlamp dimmer.
- headlamp flash-to-pass.
- windshield washer/wiper The intermittent wiper control switch, located in the knob at the end of the turn signal lever.

NORMAL OPERATION
The turn signal switch is incorporated into the multi-function switch. Turn signals operate in the following manner:
- Turn the ignition switch to RUN.
- Move turn signal switch lever to end-of-travel position to indicate a normal full turn.
- The lever remains in position without effort until turn is completed.
- The turn indicator cancel cam then automatically cancels the turn signal.

LANE CHANGE FEATURE
Operate the lane change system as follows:
- Move and hold the turn signal lever to the first stop position when changing lanes.
- Releasing the lever returns it to its normal position when the maneuver is over.