Ambient Temperature Sensor / Switch HVAC: Service and Repair

REMOVAL




1. Disconnect battery ground cable.
2. Remove six pushpins and radiator upper sight shield from vehicle.
3. Disconnect electrical connector from A/C ambient air temperature sensor and bracket.
4. Remove A/C ambient air temperature sensor and bracket from its mounting location on the wiring shield in front of the A/C condenser core.

NOTE: A/C ambient air temperature sensor and bracket must be removed from mounting bracket by unscrewing.

INSTALLATION
1. Install the A/C ambient air temperature sensor and bracket into the wiring shield.
2. Connect electrical connector to A/C ambient air temperature sensor and bracket.
3. Install radiator upper sight shield with six pushpins.
4. Connect battery ground cable.
5. Check system for proper operation.