Air Conditioning Switch: Service and Repair

SWITCH KNOBS

REMOVAL
1. To remove any of the three control knobs on the A/C control, grasp and pull rearward.

NOTE: Do not pry the knob off its shaft as damage to the surface of the air conditioner control assembly bezel may result.

2. If the D-shaped spring clip which sits inside the back end of the knob remains on shaft when knob is pulled off, remove it with needlenose pliers and install on knob.

INSTALLATION
1. To install knob, align its keyed surface with mating surface on shaft. Press knob forward until fully seated in A/C control.