Accelerator Cable Bracket

REMOVAL
1. Remove accelerator cable housing to accelerator cable bracket retaining screw.
2. Remove the bolts retaining the accelerator cable bracket to the upper intake manifold.
3. Lift the accelerator cable housing out of the accelerator cable bracket. Remove the accelerator cable bracket.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten accelerator cable bracket retaining bolts to 15-20 Nm (11-14 lb ft).
3. Tighten accelerator cable housing-to-accelerator cable bracket retaining screw to 8-12 Nm (71-106 lb in).