FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Mercury >> 1997 >> Grand Marquis V8-4.6L VIN W >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Disassembly and Assembly >> Seat Back Frame, Pad and Trim Cover >> Power

Power






REMOVAL
1. Remove seat and track assembly.
2. Disengage J-retainer and arrow retainers at outboard right rear corner and J-retainer from cushion frame side. Pull back trim cover.
3. Remove push pin retainers and remove trim cover from power seat back adjuster. Disconnect front seat back pad adjusting tube (if equipped). Disconnect harness connector.







4. Remove two screws retaining power seat back adjuster (on outboard side) and pivot bolt on inboard side. Remove front seat back assembly.
5. Disengage J-retainers at bottom of front seat back and pull up seat back liner.







6. Remove front seat back head restraint.
7. Unscrew front seat head rest guide rod retainers from front seat head rest guide rod sleeves.
8. Release hand rest guide rod springs.
9. Peel front seat back cover from bottom to top while disengaging hook fastener tiedowns.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten power seat back adjuster retaining screws to 23-32 Nm (17-23 Lb-Ft).

pro multis Credits:Operation CHARM About Operation CHARM