Keyless Entry Key-Pad: Description and Operation

CAUTION: Do not use a key, pencil or any other hard object to press the keyless entry keypad buttons. These objects may damage the buttons.

- To unlock the driver door enter the permanent factory code or enter the owner's alternate code.
- To unlock the passenger door(s), press the 3/4 button within five seconds of unlocking the driver door or luggage compartment door.
- To unlock the luggage compartment door, press the 5/6 button within five seconds of unlocking driver or passenger door(s).
- To turn on the courtesy lamps and light all illuminated components, lift either front door handle or press any button on the keyless entry keypad (if equipped).
- To lock all doors, press the 7/8 and 9/0 buttons at the same time with all doors closed. (It is not necessary to enter the key code first.) This will turn off courtesy lamps.

To program an alternate keyless entry keypad code:
1. Enter the five digit permanent entry code into keyless entry keypad.
2. Within five seconds of pressing last button of permanent code, press the 1/2 button and enter any alternate five digit code.
3. After successful programming, the doors will signal by locking and then unlocking.