Initial Inspection and Diagnostic Overview

INSPECTION and VERIFICATION
1. Verify the customer's original concern by operating the vehicle to duplicate the condition.
2. Inspect to determine if one of the following mechanical or electrical concerns apply:

Mechanical
- Damaged tanks.
- Damaged solenoids.
- Damaged lines or hoses.

Electrical
- Damaged Power Distribution Box Fuse 1 (20 amp).
- Damaged connector.
- Loose or corroded connections.

3. If the inspection reveals obvious concern(s) that can be readily identified, service as required.
4. If the concern(s) remains after the inspection, determine the symptom(s) and go to the Symptom Chart.