Fuel Pressure Test Port: Service and Repair

REMOVAL
1. If fuel injection supply manifold is mounted to engine, perform fuel pressure release procedures.
2. Using an open-end wrench or suitable deep-well socket, remove fuel pressure relief valve.

NOTE: Fuel pressure relief valve cap on fuel pressure relief valve must be removed.

INSTALLATION
1. Install fuel pressure relief valve. Tighten fuel pressure relief valve to 7.75 Nm (69 lb in).
2. Perform Post-Service procedures. Service and Repair
3. Install fuel pressure relief valve cap. Tighten to 0.6 Nm (5 lb in).