Power Window Switch: Service and Repair

REMOVAL
1. Disconnect battery ground cable.

CAUTION: Do not pry front door trim panel. Prying on front door trim panel will break the hook retainers.

2. Carefully pull front door trim panel finish panel away from front door trim panel.
3. Disconnect wires from front door lock switches, outside rear view mirror control and window regulator control switches; remove front door trim panel finish panel.
4. Using a small screwdriver, pry locking tabs retaining front door lock switch, outside rear view mirror control and window regulator control switch to front door trim panel finish panel.
5. Remove front door lock switch, outside rear view mirror control and window regulator control switch.

INSTALLATION
1. Follow removal procedure in reverse order.