Turn Signal Switch: Description and Operation
DESCRIPTIONThe multi-function switch, mounted to the lock cylinder housing, unifies the following functions:
^ windshield washer/wiper.
^ headlamp flash-to-pass and high beam.
^ turn signal.
^ hazard flashers.
NORMAL OPERATION
The multi-function switch, located on the LH side of the upper steering column, operates in the following manner:
^ Ignition switch must be in the RUN position to operate turn signals for a full turn.
^ Move the turn signal lever to the end-of-travel position for the turn desired.
^ The turn indicator cancel cam will cancel the turn signal when the turn is completed.
LANE CHANGE FEATURE
The lane change feature operates as follows:
^ Move and hold the turn signal lever to the first stop position when changing lanes.
^ Release the lever and it will return to its normal position when the lane change maneuver is completed.