Daytime Running Lamp Control Unit: Service and Repair

REMOVAL
1. Disconnect daytime running lamps control electrical connector.

WARNING: DAYTIME RUNNING LAMPS CONTROL GETS VERY HOT DURING OPERATION. BE SURE DAYTIME RUNNING LAMPS CONTROL HAS COOLED BEFORE HANDLING IT OR PERSONAL INJURY MAY OCCUR.

2. Remove nut retaining daytime running lamps control and bracket assembly to LH front fender apron.
3. Remove daytime running lamps control and bracket assembly.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining nut to 1-2 Nm (12-17 Lb-In).