Ford PID List

The Ford Parameter Identification (PID) list reflects only Ford manufacturer-specific PIDs used in the diagnostic procedures. The table lists the string of characters entered in a generic scan tool when accessing enhanced diagnostic PID information. When accessing these PIDs, the values will be continuously updated. For more information, refer to the Society of Automotive Engineers (SAE) J2205 document. Multiply the number of counts by the multiplier provided in the table for the proper conversion to Ford units.

NOTE: Be sure the PID is supported by the vehicle strategy according to the pinpoint test step or the strings may display erroneous data.

Ford PID List - Part 1 0f 7:

Ford PID List - Part 2 0f 7:

Ford PID List - Part 3 0f 7:

Ford PID List - Part 4 0f 7:

Ford PID List - Part 5 0f 7:

Ford PID List - Part 6 0f 7:

Ford PID List - Part 7 0f 7:

NOTES
[a] - ON = Fault detected, OFF = No Fault detected

[b] - The conversion chart in the Pinpoint Test Procedures must be used.

[c] - ON = Pressure detected, OFF = No pressure detected

[d] - 1 = MAN1, 2 = MAN2, 3 = DRIVE, 4 = O/D, 5 = NTRL, 6 = REV, 7 = P/N

[e] - 1100 = MAN1, 1001 = MAN2, 1111 = O/D, 0110 = NTRL, 0011 = REV, 7 = P/N