Caster

DESCRIPTION
The caster is the forward or rearward tilt of the top of the front wheel spindle. If the top of the front wheel spindle tilts to the rear, caster is positive. For correct caster angles, refer to Specifications.

PROCEDURE
Caster is adjusted by moving the front suspension lower arm strut relative to the front sub-frame. Loosen the nuts securing the front suspension lower arm strut to the front sub-frame and adjust the caster by turning the nuts in the appropriate direction until the desired setting is achieved. The setting should be locked by holding the rear nut used to adjust and tightening the opposite front nut to 140-160 Nm (104-118 ft. lbs.).