Instrument Panel - Finish Panel

WITH CONSOLE





1. Remove console panel.
2. Remove integral control panel.
3. Remove six screws and console center finish panel.
4. To install, reverse removal procedure. Tighten screws to 2-3 Nm (18-27 lb in).

WITHOUT CONSOLE





1. Remove integrated control panel.
2. Remove four screws retaining center instrument panel finish panel to instrument panel.
3. Pull center instrument panel finish panel out to disengage two retainers at LH side. Remove center instrument panel finish panel.
4. To install, reverse removal procedure. Tighten screws to 2-3 Nm (18-27 lb in).