Attachment II - Labor and Parts Information

OPERATION DESCRIPTION HOURS LABOR OPERATION

Inspect Transaxle Tag Located on Converter Housing for 0.2 Hrs. 96S51A
Date Code

Inspect Park Pawl Shaft for Free Rotation (Includes 0.9 Hrs. 96S51K
Transaxle Tag Inspection)

Replace Park Pawl Shaft (Includes both Inspections 1.2 Hrs.
Above Taurus and 96S51B

Replace Park Pawl Shaft (Includes both Inspections 1.9 Hrs.
Above Continental 96S51C

Replace Park Pawl Shaft (Includes both Inspections 2.2 Hrs.
Above Taurus SHO 96S51D

Administrative Allowance 0.1 Hrs. ADMIN

PARTS NOTICE:
ONLY ABOUT 5% OF THE AFFECTED VEHICLES WILL REQUIRE A PARK PAWL SHAFT KIT. PLEASE DO NOT ORDER EXCESSIVE QUANTITIES.

Parts Requirements
ONE PARK PAWL SHAFT KIT WILL BE DIRECT SHIPPED TO DEALERS WITH 20 - 100 AFFECTED UNITS AND TWO KITS TO DEALERS WITH MORE THAN 100 AFFECTED UNITS. IF YOU HAVE LESS THAN 20 AFFECTED UNITS OR IF ADDITIONAL PARK PAWL SHAFT KITS ARE REQUIRED, CALL 1-800-325-5621. PLEASE BE PREPARED TO GIVE THE OPERATOR THE FOLLOWING INFORMATION:

^ VIN number of the affected vehicle
^ Recall number 96S51
^ Dealer P & A Code
^ Caller's name and phone number
All other parts may be ordered through normal order processing channels.

DESCRIPTION PART NUMBER QUANTITY

Kit-Park Pawl Shaft, Roll Pin and Cup Plug F4DZ-7D071-BA 1.00

Call 1-800-325-5621 to order the above kit.

Order the following through normal order processing channels:

PART NUMBER DESCRIPTION QUANTITY

F5DZ-7A191-A Cork Gasket-Transaxle Pan
NOTE:
Only about 40% of the affected 1.00
units will require a cork gasket.
Remaining units use a reusable
elastomeric gasket.

F50Y-5E241-A Gasket-Y Pipe-to-Converter Inlet
NOTE:
Only required for 1.00
Continental and Taurus SHO.

XT-2-QDX MERCON Transmission Fluid 7.00

For latest prices, check or call your:

^ Order Processing Center
^ DOES II
^ Updated Price Book

Excess Stock Return
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.