Air Cleaner Fresh Air Duct/Hose: Service and Repair

REMOVAL and INSTALLATION

1. Loosen engine air cleaner tube clamps on air cleaner outlet tube.
2. Disconnect crankcase ventilation hoses from air cleaner outlet tube fittings.
3. Disconnect the engine control sensor wiring from the Intake Air Temperature (IAT) sensor.
4. Remove air cleaner outlet tube from Mass Air Flow (MAF) sensor and throttle body.
5. To install, reverse Removal procedure.
- Tighten engine air cleaner tube clamps to 1.6-2.2 Nm (14-19 lb in).