Removal

CAUTION: Brake fluid will damage electrical connections and painted surfaces. Use shop cloths, drip pans and fender covers to prevent brake fluid from contacting these areas.

1. Apply the brake pedal several times to exhaust all vacuum in the system.
2. Remove brake tubes from primary and secondary outlet ports of brake master cylinder. Cover the ends of the lines to prevent dirt from entering system.
3. Disconnect fluid level indicator switch connector.






4. Remove nut retaining cowl top inner panel tube to brake master cylinder.
5. Disconnect cowl top inner panel tube from cowl and remove.
6. Remove two nuts retaining brake master cylinder to power brake booster assembly.

Master Cylinder:

7. Slide brake master cylinder forward and upward from vehicle.