Evaporative Emission Control Canister: Service and Repair

Evaporative Emission System:

1. Raise vehicle on hoist.
2. Remove evaporative emission canister bracket to body retaining bolt, lower evaporative emission canister, and evaporative emission canister bracket.
3. Disconnect evaporative emission return tube from evaporative emission canister.
4. Remove push-pin and separate evaporative emissions canister from bracket, if required.
5. To install, reverse removal procedure. Tighten evaporative emission canister bracket to body retaining bolt to 5.2-7.2 Nm (43-63 lb in).