Instrument Cluster - Finish Panel

REMOVAL and INSTALLATION
1. Disconnect battery ground cable.

NOTE: When the battery has been disconnected or reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 18km (10 miles) or more to relearn the strategy.

2. Remove three instrument panel finish panel retaining screw covers.
3. Remove six screws retaining instrument panel finish panel to instrument panel.
4. Pull instrument panel finish panel away from instrument panel. Disconnect wiring harness connectors from indicator lamps and heated back window switch and light and traction assist switch, if equipped.
5. Remove cluster instrument panel finish panel.
6. To install, reverse Removal procedure.