E5 Check Wheel Speed Sensor Circuitry For Open

- Access suspect front brake anti-lock sensor or rear brake anti-lock sensor and disconnect connector.

- Using chart and Rotunda 73 Digital Multimeter 105-R0051 or equivalent, measure resistance of each suspect front brake anti-lock sensor or rear brake anti-lock sensor circuit from 2-pin connector to appropriate pin at breakout box.

- Is resistance 5 ohms or less?

YES -- Go to E6. E6 Check Resistance at Wheel Speed Sensor

NO -- Service suspect circuit for open circuit. Clear all DTCs. Restore vehicle. Retest system.