C1495-10: Check Supply to Throttle Cable Position Sensor

- Reconnect 3-pin traction assist control connector.

- Turn ignition switch to the RUN position.

- Using Rotunda 73 Digital Multimeter 105-R0051 or equivalent set to volts DC, measure voltage from pin 11 to pin 12 at breakout box.

- Is voltage between 4.4 and 4.8 volts?

YES -- Leave multimeter connected. Go to C1495-11. C1495-11: Check Voltage While Pressing Throttle

NO -- Replace hydraulic control unit. Retest system.