Lap/Shoulder Safety Belt, Rear

FEATURES
- The rear lap/shoulder safety belt extends from a retractor located on vehicle quarter panel.

- The retractor is designed to allow the safety belt to move in or out freely at all times except during hard braking, cornering or impacts of 8 km/h (5 mph) or more.

- Lap safety belts are provided for rear center seats.

- The rear lap safety belts are secured to the floorpan.

OPERATION
- The safety belt is routed through a rear safety belt opening bezel in the quarter trim rear upper panel.

- The safety belt is then directed downward over the occupant's shoulder and chest to the rear safety belt and buckle.

- The safety belt has a tongue that latches to the rear safety belt and buckle. The safety belt then continues through the tongue to the floor.