Fuel Tank: Testing and Inspection

Cleaning
Metal fuel tanks do not require special service procedures and may be steam-cleaned and/or serviced using standard procedures. After steaming, allow to thoroughly air dry. The vapor separator assembly should be replaced. Replace fuel tank support strap bolts.

CAUTION: Remove the fuel pump prior to steaming the fuel tank. Care should be exercised not to deform the plastic reservoir inside the tank with excessively hot steam or direct contact with plastic surface.

CAUTION There is NO acceptable repair procedure for Polyethylene fuel tanks that meets fuel tank standards. This includes all portions of the fuel tank body and plastic fittings attached to it. Fuel tank replacement is the ONLY acceptable procedure.