Attachment II- Labor and Parts Information

LABOR ALLOWANCES

NOTE:
These labor times reflect a different repair procedure than the Workshop Manual for these model year vehicles. The major differences are that the oil pan is not removed on any vehicle and ROLOC(TM) bristle discs are recommended for gasket removal. Please follow the technical instructions on Attachment III. By following these instructions, the labor times are achievable. To assist technicians a video presentation highlighting the key steps of the repair is planned for the first quarter of 2000. Watch for details in the recall newsletter, which can be accessed through http://www.qcdealer.com/.





PARTS REQUIREMENTS

Parts Ordering Information
Parts will not be direct shipped for this program. Order your parts requirement through normal order processing channels:

DEALER PRICE
For latest prices, check:

^ DOES II

^ Updated Price Book

EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.





TOOL ALLOWANCE

A tool allowance of $6.00 per vehicle is being given to purchase 3M(TM) ROLOC(TM) bristle discs or equivalent for use in removing the old engine front cover gasket. If these disks are purchased and used, claim this allowance by entering information from the table shown:

NOTE:
Do not use products like Scotchbrite (TM) pads or other fiber abrasives to remove this gasket. Fibers from these types of products can block the oil pressure relief valve possibly causing engine failure. ROLOC(TM) bristle discs can be obtained from your local 3M(TM) distributor. If you have trouble locating the discs, call 3M(TM) at 1-800-521-8180 extension 5165 in the United States or in Canada call 1-800-265-1840 and ask for Auto Market Distribution. They can locate distributors by zip code.