E1 Check Fluid Level Sensor No. 2, and Pedal Sensor Switch

- Turn ignition switch OFF.

Anti-Lock Module:

- Disconnect anti-lock brake wiring plug from anti-lock brake control module.

Breakout Box:

- Connect 60-pin Rotunda Breakout Box 014-00322 or equivalent with Anti-Lock Brake Adapter T90P-50-ALA to the anti-lock brake wiring plug harness.

- Check for continuity between breakout box pins 8 and 26.

- Is continuity present?

YES -- Go to E2. E2 Check Fluid Level Sensor No. 2 Switch

NO -- Go to E3. E3 Check For Voltage on Fluid Level Switch No. 2 Switch