C1 Check RH Rear ABS Sensor

- Turn ignition switch OFF.

Anti-Lock Module:

- Disconnect anti-lock brake wiring connector from anti-lock brake control module.

Breakout Box:

- Connect 60-pin Rotunda Breakout Box 014-00322 or equivalent with Anti-Lock Brake Adapter T90P-50-ALA to the anti-lock brake wiring connector on wiring harness.

- Measure resistance between pins 27 and 45.

- Is resistance between 800 and 1400 ohms?

YES -- Go to C3. C3 Check RH Rear ABS Sensor Voltage

NO -- Go to C2. C2 Check RH Rear ABS Sensor Resistance