A1 Check LH Front ABS Sensor

- Turn ignition switch OFF.

Anti-Lock Module:

- Disconnect 55-pin connector from anti-lock brake control module.

Breakout Box:

- Connect 60-pin Rotunda Breakout Box 014-00322 or equivalent with Anti-Lock Brake Adapter T90P-50-ALA to the 55-pin connector on wiring harness.

- Measure resistance between pins 30 and 48.

- Is resistance between 800 and 1400 ohms?

YES -- Go to A3. A3 Check LH Front ABS Sensor Voltage

NO -- Go to A2. A2 Check LH Front ABS Sensor Resistance