System Deactivation Procedures
Deactivation Procedure1. Disconnect the positive battery cable.
2. Wait one minute. This is the time required for the backup power supply in air bag diagnostic monitor to deplete its stored energy.
3. Remove the driver side air bag module.
4. Connect Rotunda Air Bag Simulator 105-00010 or equivalent to the wiring harness in place of the driver side air bag module.
5. Remove the passenger side air bag module.
6. Connect the Rotunda Air Bag Simulator 105-00010 or equivalent to the wiring harness in place of the passenger side air bag module.
7. Connect the positive battery cable.