D4 Check For Short to Ground In 60A ABS Fuse Circuit

- Key OFF.

- Disconnect the anti-lock relay connector.

- Remove the 60A ABS fuse.

- Measure the resistance of the "BK/BL" wire between the negative terminal of the 60A ABS fuse socket and ground.

- Is the resistance greater than 10,000 ohms?

YES -- Service the "BK/BL" wire. If 10A ABS fuse is blown, go to D5. D5 Check For Short to Ground In 10A ABS Fuse Circuit

NO -- (10A ABS fuse blown). Go to D5. D5 Check For Short to Ground In 10A ABS Fuse Circuit

NO -- (10A ABS fuse OK). Go to D6. D6 Check ABS Relay