DD1 DTC 32, 36, 42, 56 or 76

- Turn ignition switch OFF.

Anti-Lock Module:

- Disconnect anti-lock brake wiring connector from anti-lock brake control module.

Break Out Box:

- Connect 60-pin breakout box 014-00322 with Anti-Lock Test Adapter T90P-50-ALA or equivalent to the anti-lock brake wiring connector on anti-lock brake wiring harness.

- Measure resistance between pins 29 and 47.

- Is resistance between 800 and 1400 ohms?

YES -- Go to DD3. DD3 Check RH Front ABS Sensor Voltage

NO -- Go to DD2. DD2 Check RH Front Sensor Resistance