EE1 DTC 33, 37, 43, 57 or 77

- Turn ignition switch OFF.

Anti-Lock Module:

- Disconnect anti-lock brake wiring connector from anti-lock brake control module.

Break Out Box:

- Connect 60-pin breakout box 014-00322 with Anti-Lock Test Adapter T90P-50-ALA or equivalent to the anti-lock brake wiring connector on wiring harness.

- Measure resistance between pins 27 and 45.

- Is resistance between 800 and 1400 ohms?

YES -- Go to EE3. EE3 Check RH Rear Sensor Indicator Voltage

NO -- Go to EE2. EE2 Check RH Rear Sensor Indicator Resistance