B: Shift Linkage Binding, Out of Proper Gear Relationship

Pinpoint Test B: Shift Control Linkage Binding, Out Of Proper Gear Relationship

B1 Check Shift Control Linkage
- Gain access to shift control linkage as outlined.
- Actuate gearshift lever in all ranges.
- Observe all linkage during operation.

Is linkage damaged?

Yes
Replace shift control linkage. Restore vehicle. Retest system.
No
Go to B2.

B2 Check Shift Control Cable
- Check transaxle shift cable and bracket installation and tightness.

Is transaxle shift cable and bracket properly installed?

Yes
ADJUST linkage. Go to B3.
No
Service as necessary. Restore vehicle. Retest system.

B3 Check Linkage/Cable For Proper Gear Relationship
- Actuate gearshift lever in all ranges.

Does indicator match range selection?

Yes
Service is complete. Restore vehicle. Retest system.
No
Replace damaged linkage. Restore vehicle. Retest system.