Rear Seats

REMOVAL
1. Remove rear seat cushion.
2. Remove RH rear safety belt and buckle retaining bolt and remove rear safety belt and buckle.
3. Remove LH rear safety belt and buckle retaining bolt and remove rear safety belt and buckle.





INSTALLATION
1. To install, reverse Removal procedure, being sure to position safety belts and retractor as shown.
2. Make sure the safety belt webbing is not twisted. If it is, remove the twist.
3. Tighten retaining bolts to 38 Nm (28 lb-ft).
4. Check the restraint system for proper operation.