Exhaust Pressure Regulator Vacuum Valve: Service and Repair

EGR Pressure Valve Sensors:

REMOVAL
^ Disconnect battery ground cable.
^ Remove air cleaner outlet tube.
^ Disconnect idle air control valve air tube from upper intake manifold fitting and remove tube.
^ Disconnect fuel charging wiring from EGR pressure sensor.
^ Disconnect EGR pressure valve sensor hoses from EGR pressure sensor.
^ Remove EGR pressure valve sensor retaining nuts and EGR pressure sensor from EGR pressure valve sensor bracket.

INSTALLATION
^ To install, reverse removal procedure. Tighten EGR pressure valve sensor retaining nuts to 5-7 Nm (44-62 in lb).