Evaporative Emission Control Canister: Service and Repair

REMOVAL
^ Raise vehicle on hoist.
^ Remove evaporative emission canister bracket-to-body retaining bolt and lower evaporative emissions canister and evaporative emission canister bracket.
^ Disconnect evaporative emission return tube from evaporative emissions canister.
^ Remove evaporative emission canister bracket-to-evaporative emission canister push-pin and separate evaporative emissions canister from evaporative emission canister bracket.

INSTALLATION
^ To install, reverse removal procedure. Tighten evaporative emission canister bracket-to-body retaining bolt to 5.2-7.2 Nm (43-63 in lb).