TE1 - Sensor Output Outside Test Range

Diagnostic Trouble Codes (DTC) 636 indicate the output of the Transmission Fluid Temperature (TFT) sensor was out of Self-Test range. The sensor output shows a failure occurred at either the low or high end of the acceptable range. The correct range of measurement is from 0.21 to 3.50 volts.

Possible causes:
- Fluid levels not to specification.
- Transmission fluid not at operating temperature.
- Sensor resistance out of limits.
- Damaged Powertrain Control Module (PCM).

- Drive vehicle through normal city traffic to bring transmission oil temperature to at least 10°C (50°F).

- Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)

- Is DTC 636 present?

Yes -- Go to TE2. TE2 - Check For VREF At Throttle Position Sensor

No -- TFT sensor OK. Service other DTCs as necessary. Manufacturer Code Charts