Climate Control Assembly Switch

REMOVAL
1. Remove climate control assembly.
2. Remove knob.
3. Disconnect wire connector from heater blower motor switch or wire connector and vacuum hose harness from A/C damper door switch.
4. Remove retaining screw and heater blower motor switch and remove heater blower motor switch.
5. Depress tabs on both sides of A/C damper door switch. Remove A/C damper door switch.

INSTALLATION
1. Position heater blower motor switch or A/C damper door switch on heater control. Make sure retaining tabs on A/C damper door switch are engaged in slots. Install retaining screw.
2. Connect wire connector to heater blower motor switch and wire connector and vacuum hose harness to A/C damper door switch.
3. Install knob.
4. Install climate control assembly in instrument panel.
5. Check system for proper operation.