E4 Check ABS Sensor Wiring For Short

- Gain access to front brake anti-lock sensor or rear brake anti-lock sensor 2-pin connector of suspect wheel and disconnect.

- Again measure resistance between suspect wheel speed sensor pins on breakout box per chart.

1-9 RH Front Brake Anti-Lock Sensor
3-10 LH Front Brake Anti-Lock Sensor
2-17 RH Rear Brake Anti-Lock Sensor
8-16 LH Rear Brake Anti-Lock Sensor

- Is resistance greater than 100K ohms and less than 1.5K ohms?

YES -- Replace shorted front or rear brake anti-lock sensor. Clear all DTCs. Retest system.

NO -- Leave equipment connected. Go to E5. E5 Check ABS Sensor Circuitry For Open