Instrument Panel Finish Panel - LH

REMOVAL and INSTALLATION
1. Disconnect battery ground cable.

NOTE: When the battery has been disconnected or reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its adaptive strategy. The vehicle may need to be driven 18km (10 miles) or more to relearn the strategy.

2. Remove two screws retaining LH finish panel to instrument panel.
3. Pull straight outward on LH finish panel to release the finish panel retaining clips.
4. Disconnect wiring harnesses to the headlamp switch and outside rear view mirror control.
5. Remove instrument panel finish panel illumination bulb and socket. Remove instrument panel finish panel and outside rear view mirror control, headlamp switch.
6. To install, reverse Removal procedure.