KD6 - Check VPWR to CANP

Diagnostic Trouble Code (DTC) 565 or 569 indicates a failure in the Canister Purge (CANP) solenoid circuit.

Possible causes are:

- Damaged CANP solenoid.

- Open harness (VPWR or CANP).

- Shorted (power or ground) harness.

- Damaged Powertrain Control Module (PCM).

- Key "ON", engine "OFF".

- Disconnect appropriate CANP solenoid.

- Measure voltage between VPWR an the CANP solenoid vehicle harness connector and battery ground.

- Is the voltage greater than 10.5 volts?

Yes -- Go to KD7. KD7 - Check CANP Resistance

No -- Service open VPWR circuit. Reconnect CANP solenoid. Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)