Crankcase Ventilation Tube

REMOVAL
^ Remove the Positive Crankcase Ventilation (PCV) valve from the crankcase ventilation tube.
^ Remove the upper crankcase ventilation tube-to-cylinder block bolt.
^ Raise and support the vehicle.
^ Remove the three lower crankcase ventilation tube-to-cylinder block bolts. Remove the crankcase ventilation tube and the crankcase ventilation grommet.

INSTALLATION
^ To install, reverse the removal procedure. Tighten the crankcase ventilation tube-to-cylinder block bolts to 8-11 Nm (6-8 ft lb).