DR1 - Will Engine Start

Continuous Memory Diagnostic Trouble Code (DTC) 214 indicates an error has been detected in the Cylinder Identification (CID) input signal. The error could be due to a hard fault or an intermittent condition.

Possible causes:

- Open or shorted harness.

- Damaged Camshaft Position (CMP)/Crankshaft Position (CKP) sensor.

- Damaged Ignition Control Module (ICM).

- Damaged Powertrain Control Module (PCM).

- Will engine start?

Yes -- Go to DR2. DR2 - Clear and Attempt to Re-Generate Code 214

No -- Go to Ignition Systems/ Electronic Ignition (EI) Diagnostics.