B ABS Sensor Open Circuit

- Drive the vehicle at 10 km/h (6 mph).

- Recheck the malfunction codes. Refer to the Quick Test in this section. Quick Check/Symptom Tests

- Is a Code 11, 12, 13, or 14 obtained?

YES -- Go to Pinpoint Test A1. A1 Check System Integrity

NO -- (No codes). Intermittent fault. Refer to Continuous Test. QT8 Perform Continuous Test

NO -- (Code 15 reappears). Substitute a known good anti-lock brake control module. Perform this test step again.