B2 - Check Harness and B-Pillar Limit Switch Open Position

^ Rotate the motor by hand so that the transport is at the B-pillar.

^ Measure resistance between pins of mating connector for the passive restraint module:

- Driver side between pins 18 (circuit 872, LG) and 24 (circuit 875, BK/LB).

- Passenger side between pins 21 (circuit 873, T) and 24 (circuit 875, BK/LB).

^ Is resistance greater than 500k ohms?

YES -- Switch and wiring OK.

NO -- Go to B4. B4 - Check B-Pillar Limit Switch Open Position