A5 - Check Harness From Module Connector to A-Pillar Switch

^ Measure resistance between pins of the limit switch harness to pins of the passive restraint module mating connector:

- Driver side -- one limit switch pin to pin 24 (circuit 875, BK/LB), other limit switch pin to pin 5 (circuit 862, BR/Y).

- Passenger side -- one limit switch pin to pin 24 (circuit 875, BK/LB), other limit switch pin to pin 23 (circuit 874, GY).

^ Is continuity present?

YES -- Wiring OK.

NO -- Service respective circuit. Install original passive restraint module.