After on-Board Diagnostics

After the On-Board Diagnostics procedures are completed, service all DTCs.

Begin with non-transaxle related DTCs, then service any transaxie related DTCs. Refer to the On-Board Diagnostic Trouble Code Description Chart for information on Condition and Symptoms. This chart will be helpful in referring to the proper information and to aid in diagnosing transaxle concerns and external non-transaxle inputs. The Pinpoint Tests are used in diagnosing electrical concerns of the AX4N transaxle. Make sure that the vehicle wiring harness and the PCM are diagnosed as well. The Computers and Control Systems/System Diagnosis will aid in diagnosing non-transaxle electronic components.

Note: The vehicle wiring harness, PCM and non-transaxle sensors may affect transaxle operations. Service these concerns first.